The lead game developer Quinn Duffy described the gameplay as follows: “Wins should be tactical. If you have a screen connected to the Generic x86-64 system, after a minute or so the Home Assistant welcome banner will appear in the console.The game engine is largely identical to the first part. Plug in an Ethernet cable that is connected to the network.Ubuntu), shut it down and remove the live operating system USB device. If you used a live operating system (e.g. If you used your desktop system to write the HAOS image directly to a boot medium like an S-ATA SSD, connect this back to your Generic x86-64 system. If you are having issues with Balena Etcher, try version 1.10.When Balena Etcher has finished writing the image, you will see a confirmation.Select Flash! to start writing the image.Select the boot medium (storage device) you want to use for your installation.When Balena Etcher has downloaded the image, click Select target.Paste the URL for the Generic x86-64 image into Balena Etcher and select OK.Select and copy the URL or use the “copy” button that appear when you hover it. Next, we need to write the Home Assistant Operating System image to the “boot medium”, which is the medium your x86-64 hardware will boot from when it is running Home Assistant. To enter the BIOS, start up your x86-64 hardware and repeatedly press the F2 key (on some systems this might be Del, F1 or F10). However, the options should still be present and named similarly. The BIOS menu will likely look different on your system. The following screenshots are from a 7th generation Intel NUC system. To boot Home Assistant OS, the BIOS needs to have UEFI boot mode enabled and Secure Boot disabled.
Configure the BIOS on your x86-64 hardware There are two ways to do this listed below. You will need to configure your Generic x86-64 PC to use UEFI boot mode, then write the HAOS (Home Assistant OS) disk image to your boot medium. Pretty much all systems produced in the last 10 years support the UEFI boot mode. The system must be 64-bit capable and able to boot using UEFI. This guide assumes that you have a dedicated Generic x86-64 PC (typically an Intel or AMD-based system) available to exclusively run Home Assistant Operating System.
0 kommentar(er)
